Product Introduction

DLX-CONO Series E1-10/100 base-t Protocol Converter is a conversion device that can realize the conversion from E1 interface to 10/100Base-T interface. Provides 2048Kbit/s data transmission channel for line concentrator or exchanger to combine two LANs into one LANs via transmission apparatus (such as optical transmitter/receiver and so on) and use same IP address. Supports automatic learning MAC address function. Filtrate data package via address list and be transparent in TCP/IP protocol.

Product Feature

●     Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure

●     Offers one channel E1 port and Automatically adapt to 75ohm & 120ohm Impedance

●     Master clock, incept resume clock optional

●     Provides powerful network management functions

●     Possess complete alarm and status indication function

●     Adopts manifold power supply: -48V DC or 220V AC

Technologies reference

●     Interface type: E1,10/100Base-T

●     Bit rate: 2048KBIT/S±50ppm

●     Transmission end rate: 2048Kbit/S

●     User end rate: 10/100Mbit/S

●     E1 impedance: 75ohm(unbalance)/120ohm(balance)

●     Clock type: master clock, slave clock optional

●      Power

Voltage：180V～240V AC，－36V～－72V DC

Power consumption: ＜5W

● Working environment:

Operating temperature: 0℃~50℃

Storage temperature: -40℃~70℃

Environment humidity: 5~90%(non-condensing)

Atmospheric pressure: 86～106KPA

●     Dimension: 200mm×140mm×35mm

●     Indicator:

PWR: Power Indicator

LINK: Ethernet Connection Indicator

WTX: WAN Send data Indicator

WRX: WAN Receive data Indicator

LTX: LAN Send data Indicator

LRX: LAN Receive data Indicator

LOS: E1 Signal Indicator

COL: LAN Signal Indicator
ERR: Wrong Code Indicator

Typical Application

copyright (c) 2008, Dailianxu Engineering Co.,Ltd. all right reserved

Email: hongcai@dailianxu.com  MSN: dailian80@hotmail.com

Phone:+86-755-27338117