Product Introduction

DLX-CONO Series E1-V.35 Protocol Converter can realize the bi-directional data transmission between E1 and V.35. This equipment is widely used in connection between WAN and LAN, image monitoring and realize the conversion between V.35 interfaces.

Product Feature

●     Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure

●     Offers one channel E1 port and Automatically adapt to 75ohm & 120ohm Impedance

●     V.35 port rate is n×64Bbit/s(n=1～32)or 2048KBIT/S

●     Work schedule can be set optionally

●     Master clock, incept resume clock optional

●     Supports DTE or DCE working manner

●     Provides powerful network management functions

●     Possess complete alarm and status indication function

●     Adopts manifold power supply: -48V DC or 220V AC

Technologies reference

●     Interface type: E1,V.35 data port

●     E1 rate: 2048KBIT/S±50ppm

●     V.35 rate: 2048KBIT/S or  n×64Bbit/s(n=1～32)

●     E1 impedance: 75ohm(unbalance)/120ohm(balance)

●     Clock type: master clock, slave clock or outside clock optional

●     Working manner: DTE or DCE optional

●     Power

Voltage：180V～240V AC，－36V～－72V DC

Power consumption: ＜5W

● Working environment:

Operating temperature: 0℃~50℃

Storage temperature: -40℃~70℃

Environment humidity: 5~90%(non-condensing)

Atmospheric pressure: 86～106KPA

●     Dimension: 200mm×140mm×35mm

●     Indicator:

PWR: Power Indicator

LOS: E1 Signal Indicator

RMA: Opposite End Alarm Indicator

TD: V.35 Send data Indicator

RD: V.35 Receive data Indicator

DCE: DEC Working Manner Indicator

TS16: Time Slot Indicator

Typical Application

copyright (c) 2008, Dailianxu Engineering Co.,Ltd. all right reserved

Email: hongcai@dailianxu.com  MSN: dailian80@hotmail.com

Phone:+86-755-27338117